Skip to content

RightsMonitoring

Instant Blog Articles

Try it for yourself Copier Repair and Paper Feed Troubleshooting

From the moment that you realize you need photo copier repair, frustration sets in. You possessed a feeling that something was going wrong, but you could not put your finger on it. Still, you possessed Copier Repair Dallas duplicates that must be made and you did not have time to figure out just what was going on. So now, you are down a piece of equipment and all of the work in your home or office has come to a standstill. While you might want to call a professional to come out and take care of things, consider trying to fix the paper feed issues on your own first.

Investigate the problem

You already know that the paper is not coming through, as it should. The lights are boasting and your work is not being completed. Even if you are sure you have a paper feed issue, make sure that you understand exactly what is happening. Which tray is the paper coming from? Are items being picked up by the machine at all or is it just sitting there and claiming to be packed? If you clear everything out, is the problem sorted? It is always tough to unravel a problem if you don’t know exactly what is wrong. Once you have a better idea of the proceedings, you can get down to your photo copier repair.

Check the Rollers

The rollers are often the origin of many a photo copier repair. If you start to see that things are playing up as the paper is being drawn into the machine, there is a good chance that the rollers are the culprits. Eliminate the paper and take a nearer look. If there are loose pages ripped off within, they may be causing the entire system to power down. Most of the time they can be removed personally. If the path is clear, it may be time to clean out the rollers.

While still considered a photo copier repair, cleaning out the rollers is also a maintenance issue. If you don’t want to continue to see the same problem over and over again, schedule a time to handle this work every once in a while. Use a lubrication like WD-40 and apply it onto a towel. Take that towel and apply over the entire surface of the rollers. You don’t want to leave them saturated, as you will quickly see the substance quit on your documents once they’ve been tell you the machine. Take another cloth and wash the rollers off completely. Remember not to try and force them to turn. There should be a mechanism that you can release that will permit them to turn unhindered.

No comments yet.

Leave a Reply

Your email address will not be published. Required fields are marked *

SidebarComments (0)